Quality Score in Google Ads is a rating from 1 to 10, reported for each keyword, that shows how the quality of your ads compares with other advertisers bidding on the same searches. It is built from three components: expected clickthrough rate (how likely your ad is to be clicked when it shows), ad relevance (how closely the ad matches the intent behind the search) and landing page experience (how relevant and useful the page is to people who click). Each component is rated Above average, Average or Below average, and a higher Quality Score means your ad, keyword and landing page fit the search better than most competitors' do.
That is the definition. The part most teams get wrong is what the number is for. This post covers how Google uses (and does not use) Quality Score, how to find it in your account, what each component rating tells you, how to improve each one, and how Quality Score differs from the optimization score shown on your campaigns.
A Diagnostic Tool, Not an Auction Input
Google is explicit about this in its Quality Score help article: "Quality Score is a diagnostic tool meant to give you a sense of how well your ad quality compares to other advertisers." The same page says "Quality Score is not an input in the ad auction." In other words, the auction never looks at the 1 to 10 number you see in your account.
What the auction does look at is ad quality. Google's article About ad quality says "Google considers ad quality in establishing your Ad Rank", that "Higher quality ads typically cost less per click than lower quality ads", and that "If your ads are low quality, you may find that your actual CPC is close to your maximum CPC." Its advice on the score itself is short: "Use Quality Score to diagnose low quality ads, rather than trying to optimize the 1-10 score you receive."
Ad Rank decides whether and where your ad shows. Google's Ad Rank help page says it is "calculated based on many factors, including your bid amount", the quality of your ads and landing page, Ad Rank thresholds, the competitiveness of the auction, the context of the search and the expected impact of assets. It also notes that "you can still win a higher position at a lower price by using highly relevant keywords and ads."
So the relationship is indirect. The same signals that feed Quality Score (expected clickthrough rate, relevance, landing page experience) matter in the live auction, and the 1 to 10 score is a summary Google gives you so you can find where those signals are weak.
How Quality Score Is Rated
A few details from Google's documentation explain most of the surprises people see in their accounts:
- It is keyword-level. Every keyword has its own score. Campaigns and ad groups do not have one.
- It is comparative. Each component is judged against other advertisers whose ads showed for the exact same search over the last 90 days. "Average" means typical for that auction, not good.
- A dash means not enough data. A "—" in the column means "there aren't enough searches that exactly match your keywords" for Google to calculate a score.
- Broad match can borrow a score. A broad match keyword can show a score without its own impressions when an exact match keyword with the same text in the same ad group has them.
How to See Quality Score in Your Account
Quality Score is hidden by default. To add it:
- Open Campaigns, then Keywords.
- Click the columns icon and choose Modify columns for keywords.
- Expand Quality score and add Quality Score, Landing page exp., Exp. CTR and Ad relevance.
- Optionally add the "(hist.)" versions, which show the values for the reporting period you have selected rather than today's value.
Then add the Cost column and sort by it. A list of keywords sorted by spend, with the three component ratings next to each, is the only Quality Score view worth looking at. A score of 4 on a keyword that spent nothing this quarter is trivia. A score of 4 on the keyword that takes a fifth of the budget is a project.
What Each Component Rating Means and How to Improve It
Because the overall number is a summary, the work happens one component at a time. Each one points to a different part of the account.
Expected clickthrough rate
This is Google's estimate of how likely your ad is to be clicked when it shows for that keyword, compared with other advertisers. A Below average rating usually means the ad does not look like an answer to the search, or the keyword brings searches you would not want to click on anyway.
- Put the searcher's own words in the headline. If the keyword is "lead routing software", a headline about "revenue operations" asks the searcher to translate.
- Check the search terms report. Informational and job-seeking searches ("what is", "salary", "course") drag clickthrough rate down and rarely convert for a B2B product; add them as negatives.
- Tighten match types on the keywords that carry spend. Broader matching shows the ad on more varied searches, and some of them will never click. Our guide to exact match vs phrase match shows a simple B2B structure.
- Use assets that add something specific, such as sitelinks to the pricing or integrations page, instead of repeating the headline.
Ad relevance
Ad relevance measures how closely the ad matches the intent behind the search. It is the easiest component to fix and the one most often broken by account structure: one ad group holding thirty keywords about different problems, all served by the same two ads.
- Split ad groups by intent, not by product line. "Round robin lead assignment" and "Salesforce lead routing" are different questions even if one feature answers both.
- Write the ad for the ad group's theme, so each headline speaks to the keywords inside it.
- Move stray keywords. A keyword that sits in the wrong ad group will show Below average ad relevance no matter how good the ad is for the rest of the group.
Landing page experience
Landing page experience is how relevant and useful the page is to the people who click. It is the component B2B teams struggle with most, because many accounts send every ad group to one generic demo page. Our post on landing page experience covers the attributes Google looks for and a full diagnostic checklist. The short version:
- Message match first. The page headline should repeat the promise of the ad. If the ad says "Lead routing that writes owners into Salesforce", the page should say the same thing above the fold.
- The offer visible without scrolling. The demo, report or webinar seat from the ad, and its button, on the first screen on desktop and mobile.
- Transparency. Company name, a privacy link next to the form, and a line saying what happens after the visitor submits.
- Speed on a phone. Hero text and the button should render without waiting for videos, carousels or chat widgets.
This is where personalization earns its place. Building a separate page for every ad group is rarely realistic, but one page template that swaps its headline, proof block and button wording by campaign, ad group or the visiting company's industry can match each ad's message while staying one URL to maintain. Keep a complete default version for visitors without parameters and for crawlers, and change the promise, not the facts: pricing and terms stay identical for everyone.

In Markettailor that swap is set up in the personalization editor, with segments built from UTM values, the ad group or company data from visitor identification. For the step-by-step build, see our how-to on creating personalized landing pages.
Worked B2B Example (Illustrative)
Illustrative example. The company, keywords and ratings are invented to show the method.
A company selling contract management software runs one search campaign with three ad groups. After adding the Quality Score columns and sorting by cost, the marketing lead sees this:
| Keyword | Share of spend | Quality Score | Exp. CTR | Ad relevance | Landing page exp. |
|---|---|---|---|---|---|
| [contract management software] | Largest | 7 | Average | Above average | Average |
| "contract management for legal teams" | Second | 4 | Average | Average | Below average |
| contract lifecycle management | Third | 3 | Below average | Below average | Below average |
Reading it. The first keyword is fine and can be left alone. The second has one weak component: landing page experience. Its ad promises a tool built for legal teams, but the click lands on the homepage, which talks about procurement and sales contracts. The third is weak on all three: it sits on broad match in an ad group written for "contract management software", and the search terms report shows it matching course and certification searches.
The fixes. For the second keyword, the team sends the ad group to a legal-team page whose headline repeats the ad ("Contract management built for in-house legal teams"), with a proof block about approval workflows and a shorter form. For the third, they move it to its own ad group with phrase match, write ads about lifecycle stages, and add "course", "certification" and "jobs" as negatives.
What they measure. Not the score. They log the date of each change and compare conversion rate, cost per click and the share of spend going to search terms they actually want over the following weeks. The component ratings are checked again afterwards, to confirm the diagnosis rather than to celebrate a number.
Our View: Fix the Expensive Keywords, Then Stop
I have seen B2B teams spend a quarter pushing keywords from 6 to 8 because a dashboard turned the number green. Google itself tells you not to do that, and I agree with it. Quality Score is most useful as a sorting tool: list keywords by spend, find the ones with a Below average component, and fix the component, which is almost always the landing page in B2B. Once your big-budget keywords are Average or better on all three, the next improvement comes from whether the clicks are the right companies, which Quality Score cannot see.
Teemu Raitaluoto, founder and CEO of Markettailor
Quality Score vs Optimization Score
The two are easy to confuse because both appear in the Google Ads interface and both sound like a grade for your account. They measure different things.
| Quality Score | Optimization score | |
|---|---|---|
| What it rates | Ad quality compared with other advertisers | How well the account is set to perform, according to Google's recommendations |
| Scale | 1 to 10 | 0% to 100% |
| Level | Keyword | Campaign, account and manager account |
| Built from | Expected CTR, ad relevance, landing page experience | Available recommendations and their estimated impact, based on your statistics, settings and account status |
| How to raise it | Improve ads, keyword grouping and landing pages | Apply or dismiss recommendations |
Google's optimization score help article states that "Optimization score is not used by your Quality Score." A high optimization score means you have acted on Google's recommendations, not that your ads are better than your competitors'. Treat recommendations as suggestions to evaluate; several of them (broader match types, automatically created assets, higher budgets) can work against a B2B account that needs tight intent. If you are weighing budget recommendations, our explainer on what Performance Planner does covers how Google's forecasts are built.
Putting It Into Practice
- Add the four Quality Score columns and the Cost column to the keywords view.
- Sort by cost and mark every keyword with a Below average component among the top spenders.
- Fix expected clickthrough rate with search-language headlines, negatives and tighter match types.
- Fix ad relevance by splitting ad groups by intent and writing ads per theme.
- Fix landing page experience with message match, a visible offer and a fast mobile page, personalizing one template per ad group where separate pages are not realistic.
- Log each change and judge it on conversion rate and cost per click over the following weeks.
When you are ready to match each landing page to its ad group and to the companies clicking, see how Markettailor handles segmentation and pricing.
Frequently Asked Questions
What is Quality Score in Google Ads?
A keyword-level rating from 1 to 10 that shows how your ad quality compares with other advertisers on the same searches. It is based on expected clickthrough rate, ad relevance and landing page experience, each rated Above average, Average or Below average.
Does Quality Score affect cost per click?
Not directly. Google says Quality Score is not an input in the ad auction. Ad quality is, through Ad Rank, and Google says higher quality ads typically cost less per click than lower quality ads. Use the score to find weak ads, keywords and pages, not as a target in itself.
How is optimization score calculated?
Google calculates optimization score in real time from your account's statistics, settings and status, the recommendations available to you and your recent recommendation history. It runs from 0% to 100%. Each recommendation carries a score uplift that reflects its estimated impact, and applying or dismissing recommendations changes the score; dismissing or applying all of them can take the account to 100%. Google does not publish a more detailed formula.
What is the difference between Quality Score and optimization score?
Quality Score rates ad quality per keyword on a 1 to 10 scale, compared with other advertisers. Optimization score rates how far a campaign or account has acted on Google's recommendations, from 0% to 100%. Google states that optimization score is not used by Quality Score.
What is a good Quality Score?
Google does not define a target number. A practical reading: a keyword with all three components at Average or Above average is in good shape, and any Below average component on a keyword that takes real spend is worth fixing. Chasing a 10 on low-spend keywords is rarely worth the time.
Why does my keyword show a dash instead of a Quality Score?
A dash means there are not enough searches that exactly match the keyword for Google to calculate a score. It usually appears on new or very low-volume keywords and fills in once they gather impressions.
Which Quality Score component should a B2B advertiser fix first?
Start with the Below average component on your highest-spend keywords. In B2B accounts that is most often landing page experience, because many ad groups send traffic to the same generic page. Matching the page headline to the ad's promise is usually the first fix.